Simpson THGQ5.50-SDS Truss Girder Hanger W/SDS Screws - G90 Galvanized, Made to Order Non-Returnable Zinc Large Diameter Masonry Screws Allowable loads are based on

Allowable loads are based on a minimum member thickness of 3 1/2"

Flexible design: Roofjack size accommodates pipes from 1/4" - 5"

No pre-drilling is required in most applications when using Simpson Strong-Tie fasteners

this hanger ensures reliable load transfer and minimizes the risk of failure in critical framing connections

Simpson THGQ5.50-SDS Truss Girder Hanger W/SDS Screws - G90 Galvanized, Made to Order Non-Returnable Zinc Large Diameter Masonry Screws Allowable loads are based onThe Simpson THGQ truss girder hangers are a lower cost alternative to bolted hangers, the THGQ and THGQH hangers for multi ply girder trusses use Simpson Strong Tie Strong Drive SDS Heavy Duty Connector screws to provide high load capacities and easier installation compared to bolts. The Strong Drive SDS Heavy Duty Connector screws help transfer the load between the plies of the supporting girder when they penetrate all plies. THGQ and THGQH models